Configuring Your Trusted Network; Configure The Trusted Network With Static Addresses - Watchguard SOHO User Manual

Configuring Your Trusted Network

Out of the box, the SOHO automatically uses DHCP to assign
addresses to computers on your trusted network. In other words,
every time you connect a computer to the SOHO, either directly or
through a hub, it automatically attempts to obtain its addresses
from the SOHO.
Configure the Trusted network with static
addresses
To disable the SOHO DHCP server and assign addresses statically
follow these steps:
1 With your Web browser, go to the SOHO System Status page
using the Trusted IP address of the SOHO.
For example, if using the default IP address, go to: http://192.168.111.1
2 From the navigation bar on the left side, select Network =>
Routes.
The Routes page appears.
User Guide 5.0
Configuring Your Trusted Network
47