Enabling Traffic Control - Watchguard Firebox X20E User Manual

Enabling traffic control

For information on configuring VPN Traffic Control, see "VPN Traffic Control" on page 205.
To connect to the System Status page, type https:// in the browser address bar, and the IP
1
address of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
From the navigation bar, select Network > Traffic Control.
2
The Traffic Control page appears.
Select the Enable Traffic Control check box.
3
The Interactive traffic list is enabled.
In the Upstream bandwidth limit text box, type the upstream bandwidth limit of your external
4
network connection (WAN1). Enter a value from 19 Kbps to 100,000 Kbps. The default setting is
512 Kbps.
Select the Prioritization check box if you want to add filters to the other categories.
5
The prioritization lists are enabled.
To create filters for the interactive, high, medium, or low traffic categories, click the Add button
6
adjacent to the category name. To change a filter, click Edit. To delete a filter, click Remove.
For instructions on how to add, edit, or remove a traffic filter, see the subsequent sections.
User Guide
Configuring Traffic Control
139