Configuring Bids - Watchguard Firebox X20E User Manual
Firmware version 8.6 all firebox x edge e-series standard and wireless models
Hide thumbs
Also See for Firebox X20E:
- Reference manual (78 pages) ,
- Quick start manual (12 pages) ,
- User manual (314 pages)
Table of Contents
Advertisement
Click Submit, or select a different tab to change more settings.
5
Configuring BIDS
Telstra customers in Australia must use client software to connect to the BigPond network. The
Firebox® X Edge e-Series uses BIDS to make this connection. If you do not connect to the BigPond net-
work, it is not necessary to use BIDS.
To configure your Firebox to connect to the BigPond network using BIDS:
To connect to the System Status page, type https:// in the browser address bar, followed by the
1
IP address of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
From the navigation bar, select Network > BIDS.
2
The BIDS client page appears.
To enable BIDS, select the Enable (WAN1) check box.
3
Type your login information in the User Name and Password text boxes.
4
Click Submit.
5
User Guide
Configuring BIDS
79
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Firebox X20E and is the answer not in the manual?