Hardware Description; Front Panel - Watchguard Firebox X20E User Manual

Hardware Description

The Firebox® X Edge e-Series has a simple hardware architecture. All indicator lights are on the front
panel of the device, and all ports and connectors are on the rear panel.

Front panel

The front panel of the Firebox X Edge e-Series has 18 indicator lights to show link status. The top indi-
cator light in each pair comes on when a link is made and flashes when traffic goes through the related
interface. The bottom indicator light in each pair comes on when the link speed is 100 Mbps. If the bot-
tom indicator light does not come on, the link speed is 10 Mbps.
WAN 1, 2
Each WAN indicator shows the physical connection to the external Ethernet interfaces. The light
is yellow when traffic goes through the related interface.
LAN 0, 1, 2
Each LAN indicator shows the physical connection to the trusted Ethernet interfaces.
WAP
The WAP indicator shows that the Firebox X Edge e-Series is activated as a wireless access point.
The light is green when traffic goes through the wireless interface on a Firebox X Edge e-Series
Wireless model.
Fail Over
The Fail Over indicator shows a WAN failover. The light is green when there is a WAN failover
from WAN1 to WAN2. The light goes off when the external interface connection goes back to
WAN1.
Link
The link indicator shows a physical connection to a trusted Ethernet interface. The trusted
interfaces have the numbers 0 through 2. The light comes on when traffic goes through the
related interface.
100
When a trusted network interface operates at 100 Mbps, the related 100 indicator light comes
on. When it operates at 10 Mbps, the indicator light does not come on.
User Guide
Hardware Description
233