Components List; Dhcp Leases; Disk Usage - Watchguard Firebox X20E User Manual

Monitoring the Firebox X Edge
Expires in (secs)
Number of seconds before the connection times out unless traffic is sent on the connection to
restart the timer.

Components List

This status page shows the software that is installed on the Edge. Each attribute is shown separately:
Name
•
Version
•
Build number
•
Build time
•
Remove link - The Remove column does not usually show any components. Any components
•
shown on this list are those supplied by an Edge technical support representative given to you
for troubleshooting.

DHCP Leases

This status page shows the DCHP server and the leases used by the Edge.
Status
If it appears to the DHCP server that the Edge is using the address, the status is Active. If it
appears to the DHCP server that the Edge is not using the address, the status is Abandoned.
IF
Edge interface that the client is connected to.
IP
IP address for the lease.
Times
S = time that the client requested the lease (start time).
E = time that the lease expires (end time).
MAC
MAC address associated with the lease.
Hostname
If a host name is available, it is shown here.

Disk Usage

This status page shows the current state of the flash memory on the Edge.
Filesystem
Name of the partition on the flash memory. "None" is a partition that exists only in memory, not
on the flash card.
Size
Size of the partition.
Used
Amount of memory that is used in the partition.
Avail
Amount of free space that is in the partition.
% Used
Percentage of used space on the partition.
32 Firebox X Edge e-Series