Incoming Settings - Watchguard Firebox X20E User Manual

From the navigation bar, select Firewall > Incoming or Firewall > Outgoing. You can edit both
2
incoming and outgoing traffic from either page.
The Filter Traffic page appears.
Find the common packet filter policy you want to edit and click Edit.
3

Incoming settings

From the Edit Policies page, select the Incoming tab.
1
The Incoming tab appears.
From the Incoming Filter drop-down list, select the rule you want to apply. This rule affects only
2
incoming traffic.
If the policy is set to Allow, enter the IP address of the computer that you want to receive the
3
traffic in the Policy Host field.
To use port address translation, enter the new port number in the Port Redirect text box. With
4
port address translation, the destination port in the initial packet header is changed to a different
destination
Select Host IP Address, Network IP Address, or Host Range from the drop-down list to specify
5
IP addresses on the external network that can use this policy. Type the IP address or range of IP
addresses you want to allow and click Add. You can enter more than one address.
Type network IP addresses in "slash" notation.
To have the Firebox save log messages for this policy to the log file, select the Log incoming
6
traffic check box.
User Guide
port as the packet goes through the Edge.
Editing Common Packet Filter Policies
95