Using The Ftp Proxy - Watchguard Firebox X20E User Manual

Using the FTP Proxy

To enable the FTP proxy:
To connect to the System Status page, type https:// in the browser address bar, and the IP
1
address of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
From the navigation bar, select Firewall > Outgoing.
2
The Filter Outgoing Traffic page appears.
In Common Proxy Policies, select Allow from the drop-down list adjacent to FTP Proxy.
3
Click Submit.
4
Configuring the FTP Proxy
To configure the FTP proxy, select Firewall > Outgoing from the navigation menu. Find the FTP proxy
and click Edit. Make sure you look at all tabs of the FTP proxy configuration. The Settings tab shows
you what port and protocol the proxy uses. You cannot make changes on this tab.
User Guide
Using the FTP Proxy
111