Setting A Webblocker Profile For A User; Changing A User Account Name Or Password - Watchguard Firebox X20E User Manual

Make sure you keep the administrator name and password in a safe location. You must have this infor-
mation to see the configuration pages. If the system administrator name and password are not known,
you must reset the Firebox X Edge to the factory default settings. For more information, see "Factory
Default Settings" on page 37.
We recommend that you change the administrator passphrase at regular intervals. Use a passphrase of
at least eight letters, numbers, and symbols. Do not use a word from an English or other dictionary. Use
one or more symbols, a number, and a mixture of uppercase and lowercase letters for increased secu-
rity.

Setting a WebBlocker profile for a user

A WebBlocker profile is a unique set of restrictions you can apply to users on your network.
To apply a WebBlocker profile to a user's account:
Click the WebBlocker tab.
1
Select a profile from the drop-down list. You must do this even if you have only one WebBlocker
2
profile. The default setting for all new users and groups is to bypass WebBlocker.
Click Submit.
3
If you want to use different WebBlocker profiles for each group, you must first create the WebBlocker
profiles in the WebBlocker > Profiles area of the Firebox X Edge configuration pages. For more infor-
mation on WebBlocker profiles, see "Creating WebBlocker Profiles" on page 171.

Changing a user account name or password

You can change an account name or account password. If you change the account name, you must
give the account password.
To connect to the System Status page, type https:// in the browser address bar, and the IP
1
address of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
User Guide
Using Local Firebox Authentication
161