Allowing Traffic From A Management Server - Watchguard Firebox X20E User Manual

Allowing Traffic From A Management Server

Select the Enable remote management check box.
3
From the Management Type drop-down list, select VPN Manager.
4
If you use VPN Manager 7.3, select the VPN Manager 7.3 check box.
5
Select the Enable VPN Manager Access check box to allow VPN Manager to connect to the
6
Firebox X Edge. Type and confirm the status and configuration passphrase for the Edge.
If you do not type the same passphrase when you add the device to VPN Manager, you cannot connect to
the Firebox X Edge.
Select the Enable Managed VPN check box to configure the Firebox X Edge as a client to the
7
WatchGuard DVCP server.
In the DVCP Server Address text box, type the IP address of the DVCP server.
8
Type the Client Name to give to your Firebox X Edge.
9
This is the name used to identify the Edge in VPN Manager.
Type the Shared Key.
10
The shared key is used to encrypt the connection between the DVCP Server and the Firebox X
Edge. This shared key must be the same on the Edge and the DVCP Server. Get the shared key
from your network administrator.
Click Submit.
11
Allowing Traffic From A Management Server
If you have a server on the trusted or optional network that you use to manage Fireboxes on the exter-
nal network, you must change some settings in your configuration to allow that traffic through the
Edge. You can use a wizard to apply these configuration changes automatically. Before you begin the
wizard, you must have the IP address of the Management Server.
46 Firebox X Edge e-Series