Ldap Authentication And Muvpn; Seeing Current Sessions And Users; Firebox Users Settings; Active Sessions - Watchguard Firebox X20E User Manual

Seeing Current Sessions and Users

LDAP authentication and MUVPN

Because IPSec MUVPN settings cannot be assigned at the group level, you must create a local Firebox
user account for the user and add MUVPN settings for the user on the MUVPN tab. See the Mobile User
VPN chapter for more information.
Seeing Current Sessions and Users
On the Firebox Users page, you see information about the users who are online.
To connect to the System Status page, type https:// in the browser address bar, with the IP
1
address of the Firebox® X Edge trusted interface.
The default URL is: https://192.168.111.1
From the navigation bar, select Firebox Users.
2
The Firebox Users page appears.

Firebox Users settings

Below Firebox Users Settings, you can see the current values for all global user and session settings.

Active Sessions

A session is created when traffic goes from a computer on the trusted or optional network to a com-
puter on the external network. For example, when a user on your trusted network opens a browser to
connect to a web site on the Internet, a session starts on the Firebox® X Edge.
If local user accounts are enabled, the Active Sessions section of the Firebox Users page shows infor-
mation for all current sessions, including the name and IP address of the user who started the session.
If local user accounts are not enabled, each active session shows the IP address of the hosts that have
started sessions. The user name shown is "Anonymous. "

Stopping a session

The Firebox X Edge e-Series monitors and records the properties of each user session.
If the Automatic Session Termination time limit for all sessions is reached, or if the Firebox X Edge
restarts, all sessions are stopped at the same time. The Edge administrator also can use the Firebox
Users page to stop a session.
To stop a session manually:
To connect to the System Status page, type https:// in the browser address bar, and the IP
1
address of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
166 Firebox X Edge e-Series