Hardware Description
This description applies to all WatchGuard® SSL 500 and
WatchGuard SSL 1000 models.
Front view
The photograph below shows the entire front of the
devices.
The photograph below shows a close-up of the left side of
the device. From the left:
4
LCD indicator panel and console buttons
The LCD screen shows device status information.
LCD console buttons
You use the LCD console buttons to see status
information and start recovery procedures.
If you press and hold the Up button when you
turn on the power, the device boots into Safe
Mode.
For detailed information on the LCD indicator
panel and the LCD console buttons, see "Using
the LCD Interface" on page 7.