Hydro:Evolved User Manual
9.2 Sensor Assembly Installation
The following procedure describes how to secure the Sensor Assembly to the Car Top Frame C-
Channel.
NOTE: Exact positioning and lengths of the Unistrut can be adjusted as needed if the Sensor
Array is positioned as shown in Figure 86.
Cut the lengths of Unistrut as follows:
• Two 18"
• One 24"
Bolt the two 18" lengths of Unistrut to the C-Channel.
Page 80
Figure 86: Unistrut Installation
© 2022 Smartrise Engineering, Inc. All Rights Reserved
October 2022