Table of Contents
Advertisement
User Manual for ALP442e & ALP442e-MIC
9 CONFIGURING THE CARD UNDER WINDOWS
VIA THE ALP-X MANAGER APPLICATION
This application can be launched from the shortcut created on the desktop or from the start menu,
Digigram group.
When the application is launched, the window below is displayed and shows all the ALP cards installed
in the PC.
If another view is displayed, click on the
detected.
The following settings are displayed for each ALP card detected:
its serial number,
●
the on-board firmware version,
●
the size of buffers exchanged between the driver and the card (see
●
latency of the
card).
9.1 Sampling clock management
Click on the clock icon to display the clock selection settings of each present ALP card.
ALP882e & ALP882e-MIC
,
icon to display the list of ALP cards present and
The ALP card can be configured as an internal clock or external
clock
(AES11,
To select the clock source, click on the "Prioritized source"
selection list and select the desired source.
A red padlock icon on the right of the clock name means the clock
signal is absent. A green padlock icon on the right of the clock
name means the clock signal is present.
In addition, the detected sample rate of an external clock is
displayed in the clock list.
Adjusting the internal
AES3
input,
Word
Clock).
22
Advertisement
Table of Contents
