Required Tools; Contents Of Ssa-Wall-Mount Kit - Enterasys S Series Hardware Installation Manual

This appendix provides instructions for installing the SSA on a wall using the optional
SSA-WALL-MOUNT kit.
For information about...

Required Tools

Contents of SSA-WALL-MOUNT Kit

Installation Site Requirements
Preparing the Installation Site
Mounting the SSA Chassis on a Wall
Required Tools
• ESD wrist strap (included with the SSA chassis)
• Phillips screwdriver

Contents of SSA-WALL-MOUNT Kit

Table D-1
Table D-1 Contents of SSA-WALL-MOUNT Kit
Item
Mounting bracket
10-32 x .5 inch pan head screws
Installing the SSA-WALL-MOUNT
Electrical Hazard: Only qualified personnel should perform installation procedures.
Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und qualifiziertes
Personal vorgenommen werden.
Risques d'électrocution:Seul un personnel qualifié doit effectuer les procédures d'installation.
lists the contents of the SSA-WALL-MOUNT kit.
Number
1
2
Enterasys S-Series Stand Alone (SSA) Hardware Installation Guide D-1
D
Refer to page...
D-1
D-1
D-2
D-2
D-4