Securing The Rail Assembly For A 2-Post Flush Mount Configuration; Securing A Flush Mount Rail Assembly - Enterasys S Series Hardware Installation Manual

Securing the Rail Assembly for a 2-Post Flush Mount Configuration

When securing the rail and mid-bracket assembly in a flush mount configuration:
1. Align the rail ear circular openings with outer front flange rack post openings and the
mid-bracket ear openings with outer rear flange rack post openings as shown in
2. Secure each rail assembly with two screws or fasteners appropriate to the rack at both the rail
ear and mid-bracket ear.
Figure C-11
1 Rack appropriate screws of fasteners (8)

Securing a Flush Mount Rail Assembly

Enterasys S-Series Stand Alone (SSA) Hardware Installation Guide C-13
2-Post Rack Mount Installation
Figure C-11.