Pitney Bowes mailstation Operator's Manual page 90

Maintenance
If you are still experiencing poor print quality after cleaning the printer
print head. If that does not fix the problem, replace the print head.
1. Press Menu.
2. Use the Review keys to scroll to "Use ink functions?" and press Enter/yes.
3. Use the Review keys to scroll to "Install new print head?" and press Enter/yes.
4. Lift the control panel and locate the print head.
5. Press the unlock symbol to open the cartridge holder as shown in the image below .
6. Tilt the ink cartridge toward you and lift out. The cartridge may leak from the bottom. Place it on
a napkin.
7. Squeeze the latches holding the print head guard in place.
8. Lift up the print head guard to expose the print head.
Pitney Bowes Operator Guide January 2024
nozzles, you can try cleaning the
82