Evaporative Emission Control; System (California Model Only) - Honda V65 MAGNA 1985 Manual

MAINTENANCE
EVAPORATIVE EMISSION CONTROL
SYSTEM (California model only)
PURGE CONTROL VALVE IPCVI
INSPECTION
NOTE:
The purge control valve should be inspected if
hot restart is difficult.
Disconnect the PCV hoses from their connections
and remove the PCV from its mount. Refer to the
routing label di<tgram on the frame behind the left
side cover.
'84, '85:
fa.
I.,E "I.
MIA.
1• • 1
,r._
1_.".,
.1Ilt
~'_."'l
,
~
I"'
--
Aher '85:
-
Connect a vacuum pump to the hose that goes to
the NO.2 carburetor body. Apply the specified
vacuum to the PCV.
SPECIFIED VACUUM: 250 mm (9.8 in) Hg
The specified vacuum should be maintained.
Replace the PCV if vacuum is not maintained.
CAUTION,
To prevent damoge to the purge control VQiw.
do not
U~
Mgh air pressure sourcn. Uu
Q
1umd operated air pump only.
Plug the hose that goes to the No.2. 4 carburetors.
TO 2.4
CAR8URETOR'~S~~~
TO CHARCOAL )
CANISTER
-'"'r"'''!;~~1
TD ND. 2
CARBURETOR
BODY
VACUUM PUMP
ST·AH-260-MC7 (U.S.A.
PURGE CONTROL VALVE
TO
1, 3
CARBURETORS
Remove the vacuum pump and connect it to the
hose that goes to the No.1. 3 carburetor bodies.
Apply the specified vacuum to the PCV.
SPECIFIED VACUUM: 250 mm (9.8 in) Hg
The specified vacuum should be maintained.
Replace the PCV if vacuum is not maintained.
4-20
BLOCKED TUBE
I
VACUUM PUMP
ST·AH·260-MC7 (U.S.A. only)