Honda V65 MAGNA 1985 Manual page 203

CDUNTERSHAFT INSPECTlDN
NOTE:
Countershaft spacer selection should be per-
formed whenever you replace any of the
following parts:
Crankcase (Section 11)
Countershaft bearing (Section t 11
Countershaft
Select the correct output gear case gasket (page
13-151.
Install the output gear case assembly and new gasket
onto the lower case.
Assemble the transmission with the original spacer.
Measure the clearance between the bearing and
SPllCff with
a
feeler gauge.
CLEARANCE: 0.3-6.4
mm
10.012-0.016
in)
TRANSMISSION
If the clearance exceeds the limit, select a spacer to
obtain the correct clearance:
SPACER!THICKNESS:
0.85
mm
10.033
in)
0.90
mm
(O.035
in)
0.95 mm 10.031 in)
1.00
mm
10.039
in)
1.05
mm
10.041
in)
t
SPACER
13-17