Honda V65 MAGNA 1985 Manual page 189

0.24 mm (0.009 in)
0.18 mm (0.007 in)
For servicing of the gearshift linkage, see Section 8.
TRANSMISSION DISASSEMBLY
Separate the crankcase (Section 111.
Remove the dowel pin from the crankcase.
Inspect the backlash of each gear.
SERVICE LIMITS:
Low:
2nd, 3rd, 4th, Sth, 6th:
Remove the main$haft and countermaft.
Remove the output gear case.
Index the countershaft bearing holder to the outPUt
gear case, for ease of reassembly.
NOTE:
When removing the countershaft. pull the
countershaft with remaining gears out of
crankcase after removing the C1, CS. C2, CJ
geal"l, spline washer, plain washers, and bush-
ings in the crankcase.
-
MAINSHAFT
l
C2 GEAR
TRANSMISSION
C5 GEAR
C1GEAAR--
13-3