Honda V65 MAGNA 1985 Manual page 308

DISASSEMBLY
Remove the rubber cover.
Remove the snap ring with snap ring pliers (07914-
323(X)OlI
and remoye the push rod from the master
cylinder.
Remove the master piston, primary cup, and spring.
It may be necessary to apply a small amount of air
pressure to the fluid outlet to remove the master
piston and primary C\lp.
Clean all pam with brake fluid.
_ _,;S;,;NAP RING
MASTER CYLINDER BODY
I
PRIMARY CUP AND SPRING
HYDRAULIC BRAKES
PISTON
PUSH ROD
REAR MASTER CYLINDER 1.0.
INSPECTION
Measure the inside diameter of the master cylinder
bore.
SERVICE LIMIT: 14.005 mm (0.5533 in)
Check
for scores,
scratches, or nicks.
17-15