CYLINDER HEAD/VALVE
Turn the crankshaft clockwise until the Tl.3 mark
,
aligns with the rear crankcase mating surfaces.
Place rags or shop towels over the rear cylinder head
to prevent parts from being dropped into the crank-
case.
Tl.3 MARK
MATING SURFACE
Remove the intake and exhaust cam sprocket bolts.
Turn the crankshaft clockwise one turn (J60o) and
remove the other cam sprocket bolts.
Slide the cam sprockets with the cam chain off the
camshaft sprocket flanges.
Remove the cam chain from the sprockets and
remove the camshaft holders. Mark the camshaft
holders so that they can be reinstalled in their
original locations.
10-4
INTAKE CAM SPROCKET
EXHAUST CAM sPROCKET
CAMSHAFT HOLDERS
CAM CHAIN
CAMSHAFT HOLDERS