Honda V65 MAGNA 1985 Manual page 192

TRANSMISSION
Remove the counter$haft bearing holder bolts and
holder from the case.
Remove the output drive gear and shim.
Place the countershaft/holder in a press.
Press the countersnaft OUI of the bearing holder.
COUNTERSHAFT BEARING
REPLACEMENT
NOTE:
The countershaft must be removed before
replacing bearing.
Plact the bearing holder in a vise with soft jaws
or shop towel.
NOTE:
Do not damage the bearing holder, especially
the crankcase mating surface.
BEARING HOLDER
r~~~;~~~:!:=1
Unstake the outer race lock nut with a punch.
Remove the bearing outer race lock nut with a
special tool. Discard the lock nut.
13-6
\
"