ORIVE GEAR REMOVAL
Remove the dowel pin and O-rings.
Place the output gear case in a vise with soft jaws,
being careful not to distort the case.
Place the shaft holder tool on the output driven gear
shaft, wedging it against the vise to lock the shaft.
Unstake the inner bearing race lock nut with a drill
or grinder.
Be
careful that metal particles do not
enter the bearing and that the threads on the shaft
are not damaged.
TRANSMISSION
DOWEL PIN
O-RINGS
DRiVE GEAR SHAFT
Remove the inner bearing race lock nUl.
Discard the nuts.
SHAFT HOLDER
07923-6890 101
LOCK NUT WRENCH, 42/56 mm
07916-MB40000
CQUNTEASHAFT
13-5