Advertisement
Network Configuration
Dedicated IGMP Gigabit Ethernet switches are
recommended for the best performance and
reliability.
When connecting to an existing LAN
environment, it's recommended to configure a
VLAN dedicated to these transmitter(s) and
receiver(s) to avoid traffic collision with other
networking devices.
The Transmitter's and Receiver's default IP adress
is 192.168.1.238 and 192.168.1.239 respectively. If
your existing network is DHCP enabled, the
transmitter(s) and receiver(s) will be assigned
with IP addresses automatically when connected
and turned on. Press the reset button on each
transmitter and receiver if an IP address is not
assigned automatically.
1.
Power off all devices.
2.
Connect your HDMI source device to the
Transmitter's HDMI Input connector with
an HDMI cable (HDMI cable not included).
8
Advertisement
