Advertisement
8.
Connect your HDMI display to the
Receiver's HDMI ouput connector with a
HDMI cable (HDMI cable not included).
9.
Optional: Connect the IR Receiver Cable to
the Receiver's IR Input port. This connection
is needed only if you need to control your
HDMI source device from the remote
location.
10. Plug your CAT5e/6 cable between the
Receiver's RJ45 Input and a switch or router
on your IP network.
11. Plug the included power adapters into the
Transmitter's and Receiver's power jacks,
then plug both power adapters into a reliable
power source.
12. Power on all connected devices.
13. The HDMI extender is ready for use.
10
Advertisement
