Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for gofanco HD20Ext4P-LT
Summary of Contents for gofanco HD20Ext4P-LT
- Page 1 1x4 4K HDMI Splitter/Extender - 60m User's Guide P/N:HD20Ext4P-LT G4-0154A...
- Page 2 Thank you for purchasing from gofanco. Our products aim to meet all your connectivity needs wherever you go. For optimum performance and safety, please read the instructions carefully and keep this User's Guide for future reference. If you need more information about our products, please visit www.gofanco.com.
- Page 3 Introduction The 1x4 4K HDMI CAT Splitter/Extender distributes HDMI signals from one input to four CAT6/7 outputs and one HDMI output (loopout). Features • Extends HDMI transmissions up to 60m (197ft) over CAT6/7 • HDCP 2.2/1.4 compliant • Supports up to 4K @60Hz YUV 4:4:4, HDR, HLG •...
- Page 4 Package Contents • 1x 1x4 4K HDMI Transmitter • 4x CAT6/7 Receivers • 5x IR Emitter cables • 5x IR Receiver cables • 1x TX power adapter (12V/2A) • Surface mount accessories • 1x USB cable • User guide...
- Page 5 Product Layout Figure 1: Transmitter Front Panel Layout Power LED: On when the Transmitter is powered HDMI In LED: On when HDMI signal is detected HDMI Loopout LED: On when a display is connected to the HDMI Loopout port Reset Button: Press to restart the Transmitter EDID DIP Switch: See page 10 for more information Firmware Update Port: Connects to control PC using the included USB cable for firmware update...
- Page 6 Product Layout Continued Figure 3: Receiver Front and Rear Panel Layout HDMI Out: Connects to your HDMI display Stereo and Optical Audio Out: Connects to your speakers or AV receiver Firmware Update Port: Connects to control PC using the included USB cable for firmware update Power Jack: Not required - the RXs are powered by the TX over CAT cable IR In and IR Out ports: Connects to the IR cables.
- Page 7 Hardware Installation Power off all devices including your HDMI source and HDMI display(s). Connect your HDMI source device to the Transmitter's HDMI In connector with an HDMI cable (HDMI cable is not included). Connect your CAT cables between the Transmitter and CAT6/7 Receivers.
- Page 8 Application Diagram The application diagram shows the most typical input and output devices used with the Splitter/Extender. Figure 4: Application Diagram CAT Cable Wiring We suggest both RJ-45 connectors be wired identically using T568B wiring standard for the best performance and compatibility.
- Page 9 IR Control Provides IR control of the connected devices. The IR feature is bi-directional so either the source device or the display device(s) can be remotely controlled. Controlling the Source Device Connect an IR Emitter Cable to the IR Out port of the Transmitter.
- Page 10 EDID Management EDID is used by the source device to match the video resolution to the connected display(s). However, since displays with different capabilities are often connected, the EDID DIP switch can be used to set the EDID to a fixed value to offer the best compatiblity accross all connected displays.
- Page 11 EDID Copy Instructions Unplug the splitter's power cord. Adjust all DIP switches to down position, 111. Reconnect the splitter's power cord. Connect the display, using an HDMI cable, that you would like to copy the EDID to the transmitter's HDMI loopout port. The display's EDID is automatically read and saved, and all HDMI outputs will use the EDID.
- Page 12 FAQ & Troubleshooting Poor video quality or no video signal on display: A1: Check whether the HDMI cables are connected properly and are in good working condition. A2: Make sure the resolution of the display is compatible with the splitter's resolution No HDMI signal output from the CAT6/7 connectors while the local HDMI out port is working normally: A1: Check whether the HDMI cables are connected...
-
Page 13: Specifications
Specifications... - Page 14 Blank Page...
- Page 15 Disclaimer The product name and brand name may be registered trademarks of related manufacturers. TM and ® may be omitted on the user's guide. The pictures on the user's guide are just for reference, and there may be some slight differences with the actual products.
- Page 16 Thank you for choosing gofanco www.gofanco.com...
Need help?
Do you have a question about the HD20Ext4P-LT and is the answer not in the manual?
Questions and answers