Advertisement
Quick Links
Advertisement
Related Manuals for gofanco HDwirelessMini
Summary of Contents for gofanco HDwirelessMini
- Page 1 1080p Wireless HDMI Extender Mini - 150m User's Guide P/N:HDwirelessMini G4-0151A...
- Page 2 Thank you for purchasing from gofanco. Our products aim to meet all your connectivity needs wherever you go. For optimum performance and safety, please read the instructions carefully and keep this User's Guide for future reference. If you need more information about our products, please visit www.gofanco.com.
- Page 3 Introduction The 1080p Wireless HDMI Extender Mini - 150m transmits HDMI signals wirelessly up to 490ft (150m) at 1080p resolution. It requires no cables between the Transmitter (TX) and Receiver (RX), making the installation easy and clean. Great for homes and offices. Note: Wireless transmission distance will vary due to the environmental conditions.
-
Page 4: Installation Requirements
Package Contents • 1080p Wireless HDMI Extender Mini - 150m (1 TX and 1 RX) • Micro USB to USB Type-A power cables (2pcs) • HDMI cables (2pcs) • User guide Installation Requirements HDMI source device (DVD player, set top box, PC, etc.) HDMI display device (SDTV/Monitor, HDTV/ Monitor, projector, etc.) - Page 5 Product Layout HDMI In Power Jack Figure 1: Transmitter (TX) HDMI Out Power Jack Figure 2: Receiver (RX) *Note: TX and RX pairing is required if a new/ replacement unit is needed. See Pairing Instructions on page 7.
- Page 6 Hardware Installation Power off all devices including your HDMI source and HDMI display. Connect your HDMI source device to the Transmitter's HDMI In connector with an included HDMI cable. Connect your HDMI display to the Receiver's HDMI Out connector with an included HDMI cable. Plug the included Micro USB power cables into the Transmitter's and Receiver's Power Jacks, then plug both power cables into a reliable USB 3.0 port or...
-
Page 7: Pairing Instructions
Pairing Instructions The Transmitter and Receiver units are pre-paired at the factory. When a replacement of a Transmitter or Receiver is needed, follow the pairing steps below. Power off and disconnect all devices. Connect the TX and RX to reliable power sources using the included Micro USB power cables. - Page 8 FAQ & Troubleshooting No video output on the remote display: 1) Check the HDMI source device is powered on. 2) Check the HDMI cables for solid connection. Use different HDMI cables if necessary. 3) Connect the HDMI source device directly to the display to see if there is a signal.
-
Page 9: Specifications
Specifications Resolution Up to 1080p@60Hz Audio 2Ch Stereo Bandwidth 148.5MHz (max) Transfer Rate 1.485Gbps HDMI Cable Length Input & Output: up to 26ft (8m) each Transmitter: 800mA Working Current Receiver: 500mA Operating Temperature 5 to 131 F (-15 to 55 C) Dimensions (LxWxH) TX &... - Page 10 Blank Page...
- Page 11 Disclaimer The product name and brand name may be registered trademarks of related manufacturers. TM and ® may be omitted on the user's guide. The pictures on the user's guide are just for reference, and there may be some slight differences with the actual products. We reserve the right to make changes without prior notice to a product or system described herein to improve reliability, function, or design.
- Page 12 Thank you for choosing gofanco www.gofanco.com...
Need help?
Do you have a question about the HDwirelessMini and is the answer not in the manual?
Questions and answers