Advertisement
IR User Guide
IR Extension Cables
The IR Blaster cable should be plugged into the
IR Out port of the Transmitter and the IR Receiver
cable should be plugged into the IR In port of the
Receiver. The emitter of the IR Blaster cable
should be placed as close to the IR receiver
window of the source device.
Remote Control
Use the included remote control to set/select the
TX ID on the Transmitter and the TX connected
ID on the Receiver for device pairing.
Device ID Control User Guide
Push Button Control
Press the left or right button control to change the
Device ID and Connection ID to the desired
number. To connect to the desired HDMI source
device, set the Receiver's TX Connected ID to
match the Transmitter's TX ID for successful
device pairing.
13
Advertisement
