Advertisement
1. RX ID
2. IR Window
3. Power LED
4. TX Connected
5. Power Jack
6. Data LED
7. RJ45 Input
8. Link LED
9. IR Input
10. HDMI Out
11. Reset Button
Figure 2: Receiver (RX)
Displays the Receiver's ID number
Receives IR signals from the included
remote control to set/select the channel
On when the Receiver is powered on
Displays Transmitter's ID number for
device pairing
Connects to the included power adapter
Blinks when data transmission is detected
Connects to the Transmitter's RJ45 Output
using a CAT5e/6 cable
Lights up when RJ45 signal detected
Connects to the IR Receiver cable
Connects to an HDMI display
Press the button to reset the Receiver
5
Advertisement
