Advertisement
Installation Requirements
1.
HDMI source device (computer, DVD
player, etc.)
2.
HDMI display device (SDTV/Monitor,
HDTV/Monitor, projector, etc.)
3.
UTP/STP CAT5e/6 cable following
IEEE-568B wiring standard
Product Layout
1. IR Window
2. Power LED
3. TX ID
4. Power Jack
5. Data LED
6. RJ45 Output
7. Link LED
8. IR Output
9. HDMI Input
10. Reset Button
4
Figure 1: Transmitter (TX)
Receives IR signals from the included remote
control to set/select the channel
On when Transmitter is powered on
Displays the Transmitter's ID number
Connects to the included power adapter
Blinks when data transmission is detected
Connects to the Receiver's RJ45 Input using a
CAT5e/6 cable
Lights up when RJ45 signal detected
Connects to the IR Blaster cable
Connects to the HDMI source device
Press the button to reset the Transmitter
Advertisement
