www.ti.com
The major components of the DLP650NEEVM and DLP670REEVM are:
•
DLP650NE 0.65-inch 1080p DMD or DLP670RE 0.67-inch WUXGA DMD
•
Connector designed to attach the to the DLPC4430EVM
•
TPS65145 used to generate the DMD's reset voltages
The major components of the DLP470NEVM and DLP480REEVM are:
•
DLP470NE 0.47-inch 1080p DMD or DLP480RE 0.48-inch WUXGA DMD
•
Connector designed to attach the to the DLPC4430EVM
•
TPS65145 used to generate the DMD's reset voltages
1.5 Other Items Needed for Operation
The DMD EVMs and the DLPC4430EVM are capable of displaying images on to the DMD. The EVMs are meant
to accelerate initial system design. The EVMs are meant to accelerate initial system design. However, these
EVMs do not ship with optics, illumination source, cables, power supplies, or additional hardware components.
These are system parameters that are left for the user to design or provide:
•
Power supply (See
Section
•
Mini-USB cable: USB A or B cable
•
Optics
•
Illumination module and source
•
Front-End Parallel Port source
DLPU127 – DECEMBER 2023
Submit Document Feedback
3.2.1)
DLP
Copyright © 2023 Texas Instruments Incorporated
®
Display ≥0.47-in Array WUXGA/1080p/WXGA/XGA/SVGA Evaluation
Evaluation Module Overview
5
Module