Related Manuals for Texas Instruments DLP3030-Q1
Summary of Contents for Texas Instruments DLP3030-Q1
- Page 1 DLP3030-Q1 Combiner HUD EVM DLP3030CHUDQ1EVM User's Guide Literature Number: DLPU065 November 2017...
-
Page 2: Table Of Contents
2.4.1 Automotive Control Program (ACP) Lite and Total Phase Cheetah Software Installation ..............2.4.2 How to Connect and Use the ACP Lite Tool ......................Connector Pinouts Contents DLPU065 – November 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... - Page 3 ................... 2-4. SPI Communication Connector ..................... 2-5. Photodiode Connector ..................... 2-6. LED Power Connector ..................... 2-7. MCU JTAG Connector ....................2-8. LED Thermistor Connector DLPU065 – November 2017 List of Figures Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
-
Page 4: Introduction
WFOV HUD powered by TI DLP technology. The C- ® HUD is based on the DLP3030-Q1 chipset and DLP3030-Q1 PGU. The EVM runs off of a nominal 12-V supply (not provided; see Section 2.3 for details) and accepts an HDMI input video interface. -
Page 5: Specifications
Produces 34,000 cd/m on DLP3030CHUDQ1EVM or 70 lumens on DLP3030PGUQ1EVM. Table 1-3. Temperature Specifications PARAMETER UNIT Operational Ambient Temperature Range –40 °C Storage Ambient Temperature Range –40 °C DLPU065 – November 2017 Introduction Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 6: Kit Contents
1-ft HDMI cable extender HDMI Panel Mount Connector Combiner HUD Optics 12-mm M3 Screws (2×) 10-mm M4 Screws (4×) Combiner Glass Mount Combiner Glass Figure 1-1. DLP3030CHUDQ1EVM Kit Contents Introduction DLPU065 – November 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 7: Electronic Boards Overview
DMD FFC Type A HDMI Connector Connector Power Good SPI Communicator Indicator LED Connector Figure 1-2. Formatter Controller Board Front Figure 1-3. Formatter Controller Board Back DLPU065 – November 2017 Introduction Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 8: Dmd Interface Board Front
Electronic Boards Overview www.ti.com Figure 1-4. DMD Interface Board Front Figure 1-5. DMD Interface Board Back Introduction DLPU065 – November 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 9: Getting Started
Note: This connector has a latch that must be lifted when installing the cable and then clamped down to secure its position. Figure 2-1. DMD Flex Cable Installation Alignment DLPU065 – November 2017 Getting Started Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 10: Installation Of Pgu Cables Into Formatter Board
Figure 2-2. Improper installation may cause damage to the LEDs. Figure 2-2. Installation of PGU Cables into Formatter Board Getting Started DLPU065 – November 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 11: Installation Of Led And Photodiode Cables Into
Figure 2-3. Installation of LED and Photodiode Cables into PGU • Install the HDMI cable into the HDMI connector on the Formatter Board. Figure 2-4. HDMI Cable Install DLPU065 – November 2017 Getting Started Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 12: Power Cable Install
Install the Power Input Cable into the Formatter Board. Figure 2-5. Power Cable Install • Install the Combiner Glass into the Combiner Glass mount. Figure 2-6. Combiner Glass Install Getting Started DLPU065 – November 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 13: Securing Combiner
Plug the other side of the HDMI cable into a compatible computer. • Continue to Section 2.3 for instructions on how to power up the system. DLPU065 – November 2017 Getting Started Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 14: First Power Up
For control options, like dimming the display or changing the input source settings, please reference Section 2.4 to install the Cheetah USB to SPI Adapter and Automotive Control Program (ACP) Lite on your computer. Getting Started DLPU065 – November 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 15: Evm Software Tool Configuration
The ACP Lite and Total Phase Cheetah software are necessary to control the EVM. Follow the procedure below to download and install the ACP Lite and Total Phase Cheetah drivers. Note: The Total Phase Cheetah drivers and cheetah.dll are not distributed by Texas Instruments. Login credentials must be created for www.totalphase.com/... -
Page 16: 2.4.2 How To Connect And Use The Acp Lite Tool
5. Click Connect as shown in the image above. The “System Not Connected” box will turn to “System On." 6. Navigate to Dimming and Display Mode page. Getting Started DLPU065 – November 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... - Page 17 The EVM is configured to operate with an external video resolution of 864 × 480 on initial power-up. 8. To adjust brightness, change Backlight parameter. Backlight value range is 0 to 65535. Backlight 700 to 1000 is recommended for indoor settings. DLPU065 – November 2017 Getting Started Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
-
Page 18: Connector Pinouts
Blue LED Anode Anode Common Anode Green LED Cathode Cathode Green LED Anode Anode Common Anode Red LED Cathode Cathode Red LED Anode Anode Common Anode Getting Started DLPU065 – November 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... -
Page 19: Mcu Jtag Connector
REFERENCE DESIGNATOR CONNECTOR MOLEX 5023520600 PIN # SIGNAL NAME TYPE NOTES Ground Ground Blue Thermistor Anode Ground Ground Green Thermistor Anode Ground Ground Red Thermistor Anode DLPU065 – November 2017 Getting Started Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated... - Page 20 IMPORTANT NOTICE FOR TI DESIGN INFORMATION AND RESOURCES Texas Instruments Incorporated (‘TI”) technical, application or other design advice, services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to assist designers who are developing applications that incorporate TI products;...
Need help?
Do you have a question about the DLP3030-Q1 and is the answer not in the manual?
Questions and answers