Serial Trigger And Decode; Overview - SIGLENT SDS3000X HD Series User Manual

17 Serial Trigger and Decode

17.1

Overview

The SDS3000X HD supports serial bus trigger and decoding on the following serial bus protocols:
I2C, SPI, UART, CAN, LIN, FlexRay, CAN FD, I2S, MIL-STD-1553B, SENT, Manchester and
ARINC429.
Press the Setup button on the front panel or touch the trigger descriptor box, and then select the
Type as Serial in the trigger dialog box to set the serial trigger:
A. Select the type as Serial
B. Select the serial bus protocol
C. Set the signal, including the mapping relation
between channels and bus signals, and the
thresholds
D. Trigger setting
Touch the Analysis > Decode to turn on the serial decode dialog box:
int.siglent.com
SDS3000X HD Series Digital Oscilloscope User Manual
1 03