Serial Trigger And Decode; Overview - SIGLENT SDS2000X Plus Series User Manual

SDS2000X Plus Series Digital Oscilloscope User Manual

16 Serial Trigger and Decode

16.1 Overview

The SDS2000X Plus supports serial bus triggering and decoding on the
following serial bus protocols: I
optional FlexRay, CAN FD, I2S and MIL-STD-1553B
Press the Setup button on the front panel or touch the trigger descriptor
box, and then select the
serial trigger:
A. Select the type as
B. Select the serial bus protocol
C. Set the signal, including the mapping
relation between channels and bus
signals, and the thresholds
D. Trigger setting
Press the Decode button or touch the
serial decode dialog box:
131 / 335
C, SPI, UART, CAN, LIN, and also support
2
Type Serial
as in the trigger dialog box to set the
Serial
Analysis>Decode
to turn on the
WWW.SIGLENT.COM