17.
Serial Trigger and Decode
17.1. Overview
The SDS7000A supports serial bus trigger and decode on the following serial bus protocols: I2C, SPI,
UART, CAN, LIN, FlexRay, CAN FD, I2S, MIL-STD-1553B, SENT, Manchester, USB2.0 and
ARINC429.
Click the trigger descriptor box, and then select the Type as Serial in the trigger dialog box to
set the serial trigger:
A. Select the type as Serial
B. Select the serial bus protocol
C. Set the signal, including the mapping relation between
channels and bus signals, and the thresholds
D. Trigger setting
int.siglent.com
SDS7000A User Manual
107