Connecting To Ac Power Supply; Turning On The Projector - Vivitek DU6693Z-WH User Manual

DU6693Z DLP Projector - User Manual

Connecting to AC Power Supply

The AC power cord is included in the box; plug the power cord to the AC socket on the IO panel.

Turning On the Projector

Once the projector is correctly located and the power cable and other connections are in place, it is important that the
projector is powered on correctly in order to avoid damage to components and un-necessary wear and tear. Refer to the
following guide to power on the projector.
1. Press the main power switch to the on ( I ) position as
shown. POWER LEDs flashes then lights red.
2. Press the POWER button on the control panel or ON
button on the remote control.
3. The Power LED and LIGHT LED flashes green till
power on process is finished.
4. After few seconds, both LEDs keep green, the projector
is ready for use.
UM66931217EN00
19