Turning Off The Projector - Vivitek DU6693Z-WH User Manual

DU6693Z DLP Projector - User Manual

Turning Off the Projector

Once the projector is no longer required, it is important to shut it down correctly to avoid damage or unnecessary wear and
tear to the projector.
Note:
 Do not unplug the power cable from the wall outlet or projector when the projector is powered on. Doing
so can cause damage to the AC IN connector of the project or the prong plug of the power cable. To turn
off the AC power supply when the projector is powered on, use a power strip equipped with a switch and
a breaker.
 Do not turn off the AC power supply within 10 seconds after making adjustment or changing the setting.
Doing so is possible to cause loss of adjustments and settings and return to default.
Refer to the following guide to shut down the projector.
1. Press the POWER button on the control panel or OFF
button on the remote control once, the Power Off window
displays.
2. Press the POWER button again on the OSD control panel
or remote control to verify power off, the power LED
flashes orange after Power Off is confirmed.
3. The projector enters Standby mode when the power LED
lights red.
4. Press the Main Power switch to the off position (O) to turn
off the projector.
UM66931217EN00
20