Vivitek DU6693Z-WH User Manual page 6

DU6693Z DLP Projector - User Manual
LIGHT MODULE
 A light module containing multiple laser diodes acts as the light source in the product.
 These laser diodes are sealed in the light module. It is recommended to ask a dealer for maintenance or repair
services of the light module.
 The end user is not allowed to replace the light module.
 Contact distributor who provides the qualified service for light module replacement and further information.
LASER SAFETY NOTIFICATION AND CAUTION
Do not stare at the lens while in use
 CLASS 3R LASER PRODUCT
 This Laser Product is designated as Class 3R during all procedures of operation.
 LASER LIGHT - AVOID DIRECT EYE EXPOSURE.
 Do not point laser or allow reflected laser light toward other people or reflective objects.
 Direct or scattered light can be hazardous to eyes and skin.
 There is a potential hazard of eye exposure to laser radiation if the included instructions are not followed.
 Caution – use of controls, adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
Laser Parameters:
Wavelength
Mode of operation
Pulse width
Maximum laser energy
Product Label
Manufacturer's ID Label, Explanatory Label and Certification Statement Label
Hazard Warning Symbol and Aperture Label
UM66931217EN00
: 450nm - 460nm
: Pulsed, due to frame rate
: 0.74ms
: 0.376mJ
Total internal power
Apparent source size
Divergence
5
: >100W
: >10mm, at lens stop
: >100 mili Radian