Table of Contents
Advertisement
DU6693Z DLP Projector - User Manual
OSD Operation - SIGNAL
Input Selection
This function is same as the shortcut key on the remote control. You can use the remote control or this function to select
the correct input source.
HDMI
Select the input source from the HDMI.
DisplayPort
Select the input source from the DisplayPort.
DVI-D
Select the input source from the DVI-D.
VGA
Select the input source from the VGA.
Component / BNC
Select the Input source from the BNC. The input source can be RGBHV or Component signal from computer or
component video enabled device.
HDBaseT
Select the input source from the HDBaseT.
EDID Mode
Sometimes the projector may not display the desired timing due to the compatibility of the device; you can use this
function to select the desired timing for projection. The preferred timings are listed by input source, you can use ▲ or ▼
buttons to select preferred timing for projection or select the timing automatically by setting it to Default.
UM66931217EN00
39
Advertisement
Table of Contents
