Telestream Lightspeed Live Capture User Manual page 181

Creating a Live Capture Workflow
This topic describes the general process of creating and configuring a Capture action
workflow. For configuration details, follow links or refer to online help directly in
Workflow Designer.
Note: Only ONE Capture action is allowed in a Live Capture workflow. Workflow
Designer displays the error "A workflow may contain only one Capture action" when
you attempt to add the second Capture action to it.
Follow these steps to create and activate a Capture action workflow:
1. Launch Vantage Workflow Designer.
2. Select File > Create New Workflow and name the workflow. You may also want to
create a Category (File > Create New Category), which is a folder where the
workflow is stored. The default workflow naming pattern is [Workflow
Name]_[Source Name].
Note: To avoid workflow failures, do not use these characters in workflow names:
3. In the Workflow Design panel, open the Live action category and add a Capture action
to the workflow design workspace below:
Lightspeed Live Capture User Guide
` * | \ : ; " ' < > ? /
Creating Live and Tape Capture Workflows
Creating a Live Capture Workflow
183