Timecode Break Recording - Telestream Lightspeed Live Capture User Manual

Capturing Tape Media
164
Checking on Job Status
Output Configuration—Specifies the location, which must be specified directly in the
Tape action.
Secondary Output Configuration
Secondary Output Configuration—Specifies the container type; the list is generated
from the target workflow's Target action's secondary configurations, which may be zero
or more.
Output Configuration—Specifies the location, which must be specified directly in the
Tape action.
When you click Capture, the tape rewinds to the beginning and captures the content
on the tape until EOT (End of Tape) is reached.
Note: Abort on Discontinuity is ignored when you are capturing a tape using the
Whole Tape Capture button.
Source Display—The bottom of the panel displays the VTR source for the current clips.

Timecode Break Recording

To set up a timecode break capture—a process that automatically creates a new clip file
when a break in the timecode is detected—make sure that the Tape action is
configured in your workflow as described below.
The Timecode Break feature creates separate files when it detects a break in the
timecode. To accommodate dropped frames when the tape was recorded, set the
Frame Threshold control.
In the Tape action in your Vantage workflow, set these configuration options to control
timecode break recording:
You can set these options statically for every job. Or, you can bind them to variables for
modification on a job-by-job basis. If you plan to modify these options directly in the
Tape Capture web app, bind them to variables in the Tape action in your workflow, so
that they are configurable in the Tape Capture web app; see
Configuration
disable, or change them using the gear icon
Parameters menu.
After you've set up and configured your workflow, activated it, and logged your clips,
click Capture to initiate timecode break recording.
Controls. Activate the workflow to display your variables here and enable,
Binding Variables to
in the Tape Capture Customize
Lightspeed Live Capture User Guide