Telestream Lightspeed Live Capture User Manual page 103

2. Verify that you have configured the other (non-Lightspeed) Vantage domain server
with the array, and is running. Refer to the Vantage Domain Management Guide >
Installing a Vantage Distributed Domain, for more details.
3. Verify that the Lightspeed Live Capture server is on the same network as the
Vantage array, with sufficient network permissions and access. Refer to the Vantage
Domain Management Guide > Network Requirements, to configure your network.
4. Start the Vantage Management Console, and select the new Vantage array.
5. Add the services on the Lightspeed Live Capture server to the new Vantage array,
just as you would do with any Vantage services running on any Vantage server.
Refer to the
Windows user accounts.
6. Apply the appropriate Vantage array license onto the system running the Vantage
domain database. See the Vantage Domain Management Guide for details on
licensing.
Also see
Lightspeed Live Capture User Guide
Up and Running Checklist
Configuring Various Actions on
Configuring Vantage and Updating Live Capture
Scaling Live Capture with Multiple Servers
for configuring services with appropriate
Arrays.
103