Capturing Clips; Configuring Tape Parameters That Are Bound To Variables - Telestream Lightspeed Live Capture User Manual

Capturing Tape Media
174
Using the Tape Capture Web App
7. When complete, the system generates an output file that contains all of the clips in

Capturing Clips

When your clip log is complete (the list contains all the clips you want to capture), click
the Capture button to open the Capture Clips dialog. Select the Configuration method
and Output Location, and then click Capture.
Tape Capture begins recording and capture the clips in the log into corresponding final
output media files. For multiple tapes, the Tape Capture web app prompts you to insert
the first tape when you start the capture.
If the Rewind tape setting is enabled, when all clips from the first tape are complete,
Tape Capture sends the VTR a command to rewind the tape (Note that Rewind tape
defaults to disabled.) The app also selects the next tape in the list, and indicates that a
tape needs to be inserted. Then, insert the tape and press the Capture button to resume
capture (the button displays yellow and reads Resume).

Configuring Tape Parameters that are Bound to Variables

Parameters that are bound to a variable—or any variable added to the Tape action via
the Add Variables menu—can be configured in the Customize Parameters dialog. To
bind variables to a control, see
into the VTR. After confirmation, the Web app controls the VTR and captures
each of that tape's clips in linear TC order.
b. After all clips for the tape have been captured, the Web app prompts you to
insert the next tape and the same process (step 6a) is executed. This process
continues until all clips from all tapes have been captured into individual files.
the order that they were arranged in the Clip Ordering dialog.
Binding Variables to Configuration Controls.
Lightspeed Live Capture User Guide