BMW S 1000 RR Rider's Manual page 55

Malfunction of fall sensor
Fall sensor faulty.
Have checked by a
specialist workshop.
Possible cause:
The fall sensor is not function-
ing.
Contact a repair shop,
preferably an authorized
BMW Motorrad dealer.
Motorcycle has fallen over
Cannot start engine.
Stand motorcycle up-
right. Switch ignition
on/off. Start the en-
gine.
Possible cause:
The fall sensor has detected a
fall and turned off the engine.
Raise the vehicle to upright
position and check for possi-
ble damage.
Turn ignition off and then on
again or turn emergency-off
switch on and then off again.
Emergency call function has
limited availability
with intelligent emergency
call OE
lights up yellow.
Emergency call sys-
tem restricted. If
it occurs again, have it
checked by a specialist
workshop.
Possible cause:
The emergency call cannot be
established automatically or via
BMW.
Please refer to page (
for information on using the
intelligent emergency call.
Contact a repair shop,
preferably an authorized
BMW Motorrad dealer.
Possible cause:
Plug connection disconnected.
Connect the disconnected
plug connection. (
Emergency call function failed
with intelligent emergency
call OE
lights up yellow.
Emergency call sys-
tem failure. Sched-
ule an appointment at a
specialist workshop.
Possible cause:
The control unit of the Assist
system has diagnosed a fault.
The emergency call function
has failed.
Note that the emergency call
cannot be placed.
49
62)
166)