Rider's Seat And Passenger Seat - BMW S 1000 RR Rider's Manual

78 OPERATION
RIDER'S SEAT AND PASSEN-
GER SEAT
Removing the hump cover
Park the motorcycle, making
sure the ground is level and
firm.
Using the ignition key 1, un-
lock the lock for the hump
cover 2.
Detach the hump cover 2
from the grommets 4 and un-
hook the fastener 3.
Installing the hump cover
If necessary, lubricate the
grommets 3.
Position the hump cover 1;
hook in the fixing mecha-
nism 2 when doing so.
Insert the hump cover 1 into
the grommets 3 and uni-
formly press it down.
Push the hump cover 1 down
in the center again.
Lock the hump cover 1.
Removing the passenger seat
with passenger package
Park the motorcycle, making
sure the ground is level and
firm.
Using the ignition key 1, un-
lock the lock for the passen-
ger seat 2.
Remove the passenger seat 2
by unhooking the fixing mech-
anism 3.
Remove the ignition key and
set the passenger seat on a
clean surface with the uphol-
stered side facing down.
OE