Data Recording And 2D Software - BMW S 1000 RR Rider's Manual

170 ON THE RACETRACK
Insert the new screw 1
through the ball joint 2 and
washer 3.
Install the new screw 1 in the
thread for the shift pattern
reversal 4.
Shift rod on gearshift
lever
M6 x 20
Thread-locking compound:
micro-encapsulated
6 lb/ft (8 Nm)
Slide on the protective cap 5.
The shift pattern reversal for
racing mode is set up.
DATA RECORDING AND 2D
SOFTWARE
Data recording and 2D
software
You will find all the necessary
information and support for
dealing with the 2D software
as well as reading out and eval-
uating the recorded driving
data on:
2d-datarecording.com/en/m-
gps-laptrigger.