Pit Lane Limiter - BMW S 1000 RR Rider's Manual

Clutch too hot.
played.
Let the clutch cool down.
Cooling phase of the
clutch
Approx. 3 min (with the en-
gine running)
Approx. 20 min (with the en-
gine stopped)
When starting, proceed as
usual; turn the throttle grip at
least far enough to reach the
RPM limiter.
After the clutch engages, turn
the throttle grip all the way.
Shiftpoint light lights up or
blinks.
The Launch Control controls
the ideal torque on the rear
wheel.
Leave throttle grip completely
open.
Due to the full-throttle posi-
tion of the throttle grip, the
engine speed increases as
soon as the RPM limiter is
turned off.
The throttle grip responds
again as usual.
If third gear is engaged or the
angle of inclination is greater
than 30°, the shiftpoint light
extinguishes.
The racing start with Launch
Control is completed.
is dis-

PIT LANE LIMITER

with riding modes Pro
Restricting the speed with the
Pit Lane Limiter
The Pit Lane Limiter is a sup-
port function designed to com-
ply with a speed restriction, e.g.
when riding in the pit lane. For
this purpose, a maximum en-
gine RPM is defined for riding
in 1st gear.
pends on the gear ratio and the
tire size.
Reading display range
3500...8000 min
Adjusting Pit Lane Limiter
Go to the
cle settings
activate
Select
Adjust
Operating Pit Lane Limiter
Ride in 1st gear.
The speed resulting from
the maximum RPM de-
-1
Settings
menu, then
Pit Lane Limiter
Configuration
.
RPM
151
OE
,
Vehi-
.
.