BMW S 1000 RR Rider's Manual page 164

158 ON THE RACETRACK
Insert the mirrors on the left
and right into the mounts 1.
Install the new nuts 1 and 2
on the back of the trim panel
and tighten them to the speci-
fied torque.
Mirror on front panel
carrier
M6
Thread-locking compound:
mechanical
6 lb/ft (8 Nm)
Connect the connector for the
right-hand turn signal 1 and
the left-hand turn signal 2.
Check function of the turn
signals.
Insert the air inlet flap at the
bottom 1 and clip in at the
top 2.
Position the windshield in
the arrow direction.
Install the screws 1 and 2.
Windshield on air inlet
M5 x 16
1 lb/ft (1 Nm)
Upper section of fairing
on windshield
M5 × 16
1 lb/ft (1.5 Nm)