Ddc Calibration - BMW S 1000 RR Rider's Manual

To increase the ride height,
turn the adjustment screw 2
in direction A.
To decrease the ride height,
turn the adjustment screw 2
in direction B.
Tighten the clamping bolts 1.
Clamping bolt on adjust-
ment strut
M6 x 25
6 lb/ft (8 Nm)
Remove engine jack.
Check chain sag. (
with Dynamic Damping Con-
trol (DDC) OE
Calibrate the DDC. (

DDC CALIBRATION

with Dynamic Damping Con-
trol (DDC)
OE
Calibrating the DDC
Place the motorcycle on
the side stand or a suitable
auxiliary stand. Do not sit
on the motorcycle during
the calibration. Remove any
pieces of luggage.
Go to menu
Vehicle settings
calibration
Select
214)
with
The calibration is carried out.
If the calibration was suc-
123)
cessful,
successful.
If
Park the fully unloaded
vehicle on its side
stand.
calibration must be repeated.
Select
If the calibration is still unsuc-
cessful after several attempts,
please contact a repair shop,
preferably an BMW Motorrad
Partner.
Settings
.
1 and confirm
Start
2.
OK
Calibration was
Calibration failed!
is displayed, the
.
Repeat
123
,
,
DDC
is displayed.