BMW S 1000 RR Rider's Manual page 99

Select
Mobile device
confirm.
Select
Pair new mobile
and confirm.
device
Mobile end devices are
searched for.
blinks in the lower status
line during pairing.
Visible mobile end devices are
displayed.
Select the mobile end device
and confirm.
If the fuel tank is between
the mobile terminal and
the instrument cluster, the
Bluetooth connection may be
restricted. BMW Motorrad
recommends storing the
mobile terminal above the fuel
tank (e.g. in the jacket pocket).
Observe the instructions for
the mobile end device.
Confirm that the codes match.
The connection is established
and the connection status is
updated.
If the connection cannot be
established, the troubleshoot-
ing chart in the Technical data
chapter may provide assis-
tance. ( 244)
Depending on the mobile
end device, telephone data
is transferred to the vehicle
automatically.
and Telephone data (
If the phone book is not dis-
played, the troubleshooting
chart in the Technical data
chapter may provide assis-
tance. (
If the Bluetooth connection
does not work as expected,
the troubleshooting chart
in the Technical data chap-
ter may provide assistance.
( 245)
Connect the rider's helmet
and the passenger helmet
Carry out pairing. (
Select
Passenger helm.
firm.
Show the communication sys-
tem of the helmet.
Select
helmet
seng. helmet
Helmets are searched for.
blinks in the lower status
line during pairing.
Visible helmets are displayed.
Select helmet and confirm.
The connection is established
and the connection status is
updated.
If the connection cannot be
established, the troubleshoot-
ing chart in the Technical data
102)
245)
Rider's helmet
Pair new rider's
or
Pair new pas-
and confirm.
93
92)
or
and con-